Fast drying transparent adhesion promoter, perfect for use on all bare plastics (except PE).
Designed to be used before applying any coloured adhesive vinyl. It will leave a smooth and glossy surface for cutting which will prevent the parts of the cut from coming away from the sheet.
In adequate conditions, Plastofix will allow for cutting speeds of up to 500mm/s after 30 seconds.
How do you use HB Body Plastofix?
Recommended applied by roller either in a thickness of 0,15 - 0,2mm onto a glass substrate. In order to create a smooth surface, it is recommended to apply 5 - 10 coats with a drying time between each coat of about 2 minutes. The average working angle can be from 80° up to 90° and the minimum 45° depending on the type of machine being used.
- Increases cutting speed
- Increases number of cuts per hour
- Increases production time per sheet
- Saves money as less adhesive vinyl is wasted
- Can be removed without leaving marks or glue on surface Reduces risk
UPOL Plast X Bumper Colours
We have a 30-day return policy, so if you don't like the item after receiving it and are within the time limit to request a refund then that's what we'll do. You can contact us at email@example.com for instructions on how best send your package back before sending off another one!
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
See our full returns/refund policy here