UPOL Maximum Clearcoat

UPOL Maximum Clearcoat

Nicholas Edwards

UPOL Maximum clear coat is a popular choice for car enthusiasts who want to add an extra layer of protection and shine to their vehicle's paint. This clear coat is a two-component polyurethane system that is designed to be durable, easy to apply, and resistant to UV rays, chemicals, and weathering. In this article, we will take a closer look at UPOL Maximum clear coat and provide tips on how to spray it on your car for the best results.

What is UPOL Maximum clear coat?

UPOL Maximum clear coat is a high-quality automotive clear coat that is designed to provide a long-lasting, high-gloss finish to painted surfaces. It is formulated to be used with UPOL base coat and primer products and is compatible with most other paint systems as well. This clear coat is known for its excellent leveling properties, which allow it to flow smoothly and evenly over a car's surface, creating a uniform finish. It is also resistant to yellowing, which means that it will maintain its clarity and brightness over time.

Why should you use UPOL Maximum clear coat?

There are several reasons why you should consider using UPOL Maximum clear coat on your car. Firstly, it provides a high level of protection to your vehicle's paint, helping to prevent scratches, chips, and fading caused by UV rays and weathering. Secondly, it enhances the appearance of your car's paint by adding depth and gloss, making it look like a brand new vehicle. Finally, it is relatively easy to apply and dries quickly, which means that you can achieve professional-looking results without having to spend a lot of time and effort.

How to spray UPOL Maximum clear coat

Spraying UPOL Maximum clear coat on your car requires some preparation and equipment. Here are the steps you should follow:

  1. Clean the surface: Before you can apply the clear coat, you need to ensure that the surface is clean and free of any contaminants, such as dirt, oil, or grease. Use a high-quality automotive cleaner to wash the car thoroughly and then dry it with a clean cloth.

  2. Sand the surface: Next, you need to sand the surface of the car to create a rough surface that the clear coat can adhere to. Use a fine-grit sandpaper (around 800 to 1000 grit) and sand in circular motions until the surface is smooth and even.

  3. Apply primer (optional): If you want to achieve the best results, you may want to apply a primer before applying the clear coat. This will help to create a smooth surface and improve the adhesion of the clear coat.

  4. Mix the clear coat: UPOL Maximum clear coat is a two-component system that requires mixing before application. Follow the manufacturer's instructions to mix the clear coat and hardener thoroughly.

  5. Apply the clear coat: Use a spray gun to apply the clear coat to the car's surface. Hold the gun about 6 to 8 inches away from the surface and spray in even strokes. Apply two to three coats, allowing each coat to dry for around 10 minutes before applying the next.

  6. Allow to cure: After you have applied the final coat, allow the clear coat to cure for at least 24 hours before touching or washing the car.


UPOL Maximum clear coat is an excellent choice for car enthusiasts who want to enhance the appearance of their vehicle's paint and provide an extra layer of protection. By following the steps outlined in this article, you can achieve professional-looking results with minimal effort. Just remember to take your time, follow the manufacturer's instructions, and use high-quality equipment and materials to achieve the best results. Check out our range of UPOL Maximum Clearcoat.